download crossover cable pinout for free

Most modern IT equipment can auto-detect that a crossover needs to be made and change the signal. Crossover Ethernet CableĬrossover Ethernet cables are used to connect two devices of the same type, for example, if you want to connect two routers or two PCs. Remember that Pin 1 is on the left hand side of the RJ45 connector with the clip at the rear.

Pin 3 → White and Orange (Receive +) wire.

Pin 1 → White and Green (Transmit +) wire.

T-568 A – Most commonly used in the US A and Asia – Think A for AmericaĮthernet Cable Pinout T568A and T568B RJ45 Pinout for a LAN Cable.

The different pinouts will still work if you mix them up. An easy way to remember the two different RJ45 connector pinouts is T568A is used in America and Asia, and T568B is used in Britain(UK) and Europe. There are two different pinout standards used worldwide, and depending on your location, you will determine which one you should use.

This is achieved by increasing the wire twists, better shielding, drain wire, and increased diameter. The different types of cables (category or cat) offer increasingly faster transmit and receive speeds. Straight through LAN cables are the most common, and the pinout is the same if they are Cat5e, Cat6, or Cat 7. The pinout is always the same for Ethernet cables.įiber Optics Training Straight Through LAN Cable Pinout It doesn’t matter if you make up some Cat5e, Cat6, and Cat7 cables.

The following are the pinouts for the RJ45 connectors so you can check which one you have or make up your own. Most modern communications equipment can auto-sense which type you are using, but some still need the correct cable pinout. Ethernet LAN cables can come in two types – Crossover or Straight through.

Download crossover cable pinout for free